lemon-mirror:
Home >> Acura >> 1995 >> Legend GS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Idle Control System >> Engine Controls - System/Component Tests >> Brake Switch Signal

Brake Switch Signal

  1. Ensure stoplights operate properly. Connect ECM Test Harness (07LAJ-PT3010A ) to ECM main harness. DO NOT  connect test harness to ECM. Measure voltage between test harness terminals D2 (positive) and A26 (negative). See Figure .
  2. Depress brake pedal. If battery voltage exists, switch is okay. If battery voltage does not exist, repair open in Green/White wire and ECM terminal D2.
· About lemon-mirror