lemon-mirror:
Home >> Buick >> 2017 >> Envision Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Lock Control System >> Diagnostic Information and Procedures >> Transmission Control Lever Malfunction >> Component Testing

Component Testing

  1. Install a 10 A fused jumper wire between the control terminal 4 X1 and 12 V. Momentarily install a jumper wire between the ground terminal 2 X1 and ground.
  2. Verify the solenoid turns on & off/clicks, etc.
    • If the solenoid does not turn on & off/clicks, etc 

      Replace the S3 Transmission Shift Lever.

    • If the solenoid does turn on & off/clicks, etc 
  3. All OK
· About lemon-mirror