lemon-mirror:
Home >> Cadillac >> 2009 >> Escalade EXT >> Repair and Diagnosis >> Engine Performance >> System >> Data Communication System >> Diagnostic Information and Procedures >> DTC B101E >> Circuit/System Verification

Circuit/System Verification

  1. Verify DTC B101E is not set.
    • If the DTC is set, program the control module.
  2. With a scan tool, clear the DTCs.
  3. Ignition OFF, remove the scan tool, open and close the drivers door.
  4. Wait 60 seconds, then verify DTC B101E is not set.
    • If the DTC is set, replace the control module.
· About lemon-mirror