lemon-mirror:
Home >> Cadillac >> 2017 >> CTS V >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment System >> Repair Instructions >> Rear Toe Adjustment

Rear Toe Adjustment

  1. Measure the alignment on an alignment rack. Wheel Alignment Measurement 
    2. Fig 1: Rear Suspension Adjust Link Nut & Bolt
    GM2859700Courtesy of GENERAL MOTORS COMPANY
  2. Remove the rear suspension adjust link inner nut (2).
    3. CAUTION:

    This vehicle is equipped with torque-to-yield or single use fasteners. Install a NEW torque-to-yield or single use fastener when installing this component. Failure to replace the torque-to-yield or single use fastener could cause damage to the vehicle or component.

  3. Remove and DISCARD the rear suspension adjust link inner bolt (1).
  4. Rotate the NEW rear suspension adjust link inner bolt (1) until the proper toe measurement is achieved. Wheel Alignment Specifications 
  5. Hold the rear suspension adjust link inner bolt (1) and tighten the rear suspension adjust link inner nut (2) enough to maintain the adjustment.
  6. Check the alignment specification and re-adjust if needed. Wheel Alignment Specifications 
  7. Hold the NEW rear suspension adjust link inner bolt (1) and tighten the rear suspension adjust link inner nut (2). Adjust Link Replacement
· About lemon-mirror