Removal & Installation
TRANS ID - 200, 200C, 200-4R
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| w/o Overdrive | 3.2 | 2.4 | C | |
| w/Overdrive | 3.5 | 2.6 | C | |
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | 0.2 | C | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.2 | 0.2 | C | ||
| Combination Procedure: FRONT PUMP (REMOVED): Overhaul: | ||||
| 0.5 | 0.5 | B | ||
| Combination Procedure: FRONT PUMP BUSHING & SEAL: Remove & Replace: | ||||
| 0.3 | B | |||
| Combination Procedure: OIL PUMP: Remove & Replace: | ||||
| Front | 0.6 | 0.6 | B | |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: | ||||
| Front | 0.2 | B | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.6 | 0.3 | C | ||
TRANS ID - 250, 250C, 350, 350C
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 2.8 | 2.1 | C | ||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | C | |||
| Combination Procedure: EXTENSION HOUSING: Remove & Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: FRONT PUMP (REMOVED): Overhaul: | ||||
| Trans Mfr CD 250C/M31 | 0.5 | B | ||
| Combination Procedure: FRONT PUMP BUSHING & SEAL: Remove & Replace: | ||||
| 0.3 | B | |||
| Combination Procedure: INTERMEDIATE CLUTCH ACCUMULATOR: Remove & Install or Overhaul: | ||||
| 0.2 | A | |||
| Combination Procedure: OIL PUMP: Remove & Replace: | ||||
| Front | 0.5 | B | ||
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: | ||||
| Front | 0.2 | B | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.6 | C | |||
TRANS ID - 700-R4, 4L60, 4L60E, 4L65E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 3.0 | 1.7 | C | ||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | 0.2 | C | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.2 | 0.2 | C | ||
| Combination Procedure: FRONT PUMP (REMOVED): Overhaul: | ||||
| 0.5 | B | |||
| Combination Procedure: FRONT PUMP BUSHING & SEAL: Remove & Replace: | ||||
| 0.3 | B | |||
| Combination Procedure: OIL PUMP: Remove & Replace: | ||||
| Front | 1.1 | 1.1 | B | |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: | ||||
| Front | 0.2 | B | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.6 | 0.3 | C | ||