lemon-mirror:
Home >> Chevrolet >> 2016 >> Suburban 3500 HD LS >> Repair and Diagnosis (Single Page) >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> Electronic Brake Control Module Programming and Setup >> Replace and Program Control Module or Reprogram Control Module

Replace and Program Control Module or Reprogram Control Module

To program a replacement or an existing control module, perform the following procedure:

  1. Install EL-49642  SPS Programming Support Tool.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K17 Electronic Brake Control Module - Programming and follow the on-screen instructions.
  4. On the SPS Supported Controllers screen, select K17 Electronic Brake Control Module - Configuration and Setup while following the on-screen instructions.
  5. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
· About lemon-mirror