lemon-mirror:
Home >> Chrysler >> 1982 >> Imperial >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Combustion Control Computer >> Diagnosis & Testing >> Starts, Then Stalls Checks >> Computer Supply

Computer Supply

  1. Disconnect 12-pin EFI connector from module inside computer on air cleaner housing. Connect a voltmeter between pin 8 of connector and ground, then crank engine.
  2. Voltmeter should indicate at least 9 volts. If not, reconnect connector and check wiring harness to starter relay. If voltage is correct, replace computer.
· About lemon-mirror