lemon-mirror:
Home >> Chrysler >> 1985 >> Laser Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> EGR Function Testing >> Vacuum Control >> EGR BACKPRESSURE Transducer (2.2L Turbo Only)

EGR BACKPRESSURE Transducer (2.2L Turbo Only)

  1. Warm engine to operating temperature. Disconnect vacuum hose at backpressure transducer from EGR electronic control solenoid. Connect a vacuum gauge to hose.
  2. Increase engine speed to 2000 RPM. Vacuum gauge should read at least 5 in. Hg. Reconnect vacuum hose.
  3. Disconnect vacuum hose at EGR valve and connect hand-held vacuum gauge to hose. Repeat step 2). If further testing is required, see appropriate COMPONENT TESTING article in the EMISSION section.
· About lemon-mirror