lemon-mirror:
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Removal & Installation >> Sentry Key Immobilizer Module >> Removal & Installation

Removal & Installation

  1. Disconnect negative battery cable at remote battery terminal on passenger's side strut tower. Remove knee bolster. Remove upper and lower steering column covers.
  2. Disengage steering column wire retainer from SKIM. Remove SKIM retaining screw. Disconnect harness connector. Slide SKIM from around ignition switch and remove SKIM. To install, reverse removal procedure.
· About lemon-mirror