lemon-mirror:
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Removal & Installation >> Mode Door Actuator >> Installation

Mode Door Actuator: Installation

  1. Connect the wire harness connector to the mode door actuator. Install the mode door actuator on the HVAC housing, making sure its keyed shaft is positioned properly. Install the 3 fastener screws and tighten.
  2. Reposition the center support bracket and install fastener. Install the rear seat heat forward adaptor duct. Install the center floor heat adaptor duct.
  3. Install the floor console. Install the left and right underpanel ducts. Connect the negative battery cable remote terminal to the remote battery post.
· About lemon-mirror