lemon-mirror:
Home >> Chrysler >> 2004 >> Crossfire Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Manifold Tune Valve >> Installation

Manifold Tune Valve: Installation

  1. Install the intake manifold tune valve (2) to the intake manifold.
    Fig 1: Installing Intake Manifold Tune Valve
    G01860790Courtesy of DAIMLERCHRYSLER CORP.
  2. Install the tune valve arm retaining nut the valve rod. Tighten the nut to 5 N.m (44 in. lbs.).
  3. Install the left hand air pump switch over valve and bolts. Tighten the bolts to 20 N.m (15 lb. ft.).
  4. Connect the vacuum line and the manifold tune valve harness connector at the manifold tune valve solenoid.
  5. Install the air injection pump. See EMISSIONS CONTROL article.
  6. Install the air cleaner housing. See 3.2L V6 article.
  7. Connect the negative battery cable.
· About lemon-mirror