lemon-mirror:
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection - Diesel >> Sensor - Boost Pressure >> Removal

Sensor - Boost Pressure: Removal

Fig 1: Locating Boost Pressure Sensor
GC0039522Courtesy of CHRYSLER LLC
1 - AIR FLOW CONTROL VALVE
2 - BOOST PRESSURE SENSOR
3 - CHARGE AIR CROSS OVER TUBE
4 - EGR TUBE
  1. Disconnect the negative battery cable.
  2. Disconnect the boost pressure sensor (2) electrical connector.
  3. Remove the sensor (2) fasteners from the charge air cross over tube (3), and remove sensor (2).
· About lemon-mirror