Sensor - Manifold Absolute Pressure: Removal: 3.5L

Fig 1: Locating Manifold Absolute Pressure Sensor

Courtesy of CHRYSLER LLC

1. Sensor location.
2. Disconnect negative battery cable.
   Fig 2: Electrical Connector

   Courtesy of CHRYSLER LLC
3. Unlock the electrical connector.
   Fig 3: Electrical Connector

   Courtesy of CHRYSLER LLC
4. Disconnect the electrical connector.
   Fig 4: Turning Sensor 1/4 Turn

   Courtesy of CHRYSLER LLC
5. Rotate sensor 1/4 turn clockwise.
6. Pull up on sensor.
   Fig 5: Removing/Installing Manifold Absolute Pressure Sensor

   Courtesy of CHRYSLER LLC
7. Remove sensor.