lemon-mirror:
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection >> Throttle Body >> Removal >> 5.7L

Throttle Body: Removal: 5.7L

Fig 1: Removing/Installing Throttle Body - 5.7L
GC0013155Courtesy of CHRYSLER LLC
CAUTION: Do not use spray (carb) cleaners on any part of the throttle body. Do not apply silicone lubricants to any part of the throttle body.
  1. Remove rubber air duct at front of throttle body.
  2. Disconnect electrical connector (3) at throttle body (1).
  3. Remove four throttle body mounting bolts (2).
  4. Remove throttle body from intake manifold.
    Fig 2: Locating Throttle Body O-Ring At Intake Manifold - 5.7L
    GC0013156Courtesy of CHRYSLER LLC
  5. Check condition of throttle body o-ring (2) at front of intake manifold (1).
· About lemon-mirror