| In-Line4 | | 7.2 | | C |
| Additional Procedure: TRANSMISSION ASSEMBLY: Removal & Installation: |
| Where Skid Plate interferes add | | 0.4 | | C |
| Combination Procedure: AUTO TRANS CLUTCH: Overhaul: |
| Front & Rear | | 2.4 | | A |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: FRONT PUMP: Remove & Replace: |
| | 0.2 | | B |
| Combination Procedure: FRONT PUMP SHAFT &/OR SUPPORT: Remove & Replace: |
| | 0.5 | | B |
| Combination Procedure: INPUT SHAFT: Remove & Replace: |
| | 2.0 | | A |
| Combination Procedure: KICKDOWN BAND: Remove & Replace: |
| | 2.0 | | A |
| Combination Procedure: LOW & REVERSE BAND: Remove & Replace: |
| | 2.0 | | A |
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: |
| Front | | 0.4 | | B |
| Combination Procedure: OUTPUT SHAFT: Remove & Replace: |
| | 2.5 | | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANS OIL PUMP BUSHING: Remove & Replace: |
| | 0.6 | | B |
| Combination Procedure: TRANS OIL PUMP HOUSING: Remove & Replace: |
| Rear | | 1.6 | | B |
| Combination Procedure: TRANS OIL PUMP SUPPORT BUSHING: Remove & Replace: |
| | 0.7 | | B |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.6 | | C |