lemon-mirror:
Home >> Dodge and Ram >> 2004 >> Neon SE, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Electronic Control Modules >> Controller Antilock Brake >> Removal

Controller Antilock Brake: Removal

  1. Disconnect battery negative cable.
  2. Raise vehicle.
  3. Disconnect pump/motor connector from CAB (Fig 1).
    Fig 1: Identitying CAB Mounting
    G03537684Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove four screws securing CAB to HCU half of ICU (Fig 1). Remove CAB from HCU.
  5. Pull outward on CAB connector lock and disconnect 24-way wiring connector. Remove CAB from vehicle.
· About lemon-mirror