lemon-mirror:
Home >> Dodge and Ram >> 2004 >> Neon SE, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Electronic Control Modules >> Electronic Control Modules >> Standard Procedure - Pcm/Skim Programming >> Programming The Skim

Programming The Skim

  1. Turn the ignition switch on (transmission in park/neutral).
  2. Use the DRB III and select THEFT ALARM, SKIM then MISCELLANEOUS.
  3. Select PCM REPLACED (GAS ENGINE).
  4. Program the vehicle four-digit PIN into SKIM.
  5. Select COUNTRY CODE and enter the correct country.
    NOTE: Be sure to enter the correct country code. If the incorrect country code is programmed into SKIM, the SKIM must be replaced.
  6. Select YES to update VIN (the SKIM will learn the VIN from the PCM).
  7. Press ENTER to transfer the secret key (the PCM will send the secret key to the SKIM).
  8. Program ignition keys to SKIM.
    NOTE: If the PCM and the SKIM are replaced at the same time, all vehicle keys will need to be replaced and programmed to the new SKIM.
· About lemon-mirror