lemon-mirror:
Home >> Ford >> 1988 >> Bronco II RWD, Standard >> Repair and Diagnosis >> Engine Performance >> System >> EEC-IV CEC System >> Quick Test >> Timing Check

Timing Check

  1. Turn key off, wait 10 seconds. Start engine. Activate KEY ON ENGINE RUNNING (KOER) SELF-TEST  . After the last service code has been displayed, the timing will remain fixed for 2 minutes, unless SELF-TEST is deactivated.
  2. Correct SELF-TEST timing equals base ignition timing (10 degrees BTDC on all engines) plus 17-23 degrees BTDC. If timing is not 27-33 degrees BTDC, go to TEST D13  . If timing is 27-33 degrees BTDC, proceed with KEY ON ENGINE RUNNING (KOER) SELF-TEST.
· About lemon-mirror