lemon-mirror:
Home >> GMC >> 2005 >> Jimmy Automatic, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - (Introduction) >> Repair Instructions >> Fuel Strainer Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Fuel Sender Assembly
    GM371000Courtesy of GENERAL MOTORS CORP.
  1. Install a new fuel strainer (2) in the same position as noted during disassembly. Push the strainer on the bottom of the fuel sender until the strainer is fully seated.
  2. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement (Utility/Crew Cab) .
  3. Install the fuel tank. Refer to Fuel Tank Replacement (2-Door Utility)  or Fuel Tank Replacement (4-Door Utility) .
  4. Refill the fuel tank.
  5. Install the fuel filler cap.
  6. Connect the negative battery cable.
  7. Inspect for leaks.
    1. Turn ON the ignition for 2 seconds.
    2. Turn OFF the ignition for 10 seconds.
    3. Turn ON the ignition.
    4. Inspect for fuel leaks.
· About lemon-mirror