lemon-mirror:
Home >> Genesis >> 2019 >> G80 3.8, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the Air Intake Hose.

    (Refer to Engine Mechanical System - "INTAKE AND EXHAUST SYSTEM - 3.8L ")

  3. Disconnect the ETC Module connector (A).
    G12657591Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the coolant hose (A).
    G12657592Courtesy of HYUNDAI MOTOR AMERICA
    G12657593Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the ETC Module (B) from the engine after loosening the installation bolt (A).
    G12657594Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror