lemon-mirror:
Home >> Genesis >> 2019 >> G80 3.8, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.8L >> Intake Air Temperature Sensor (IATS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolts (B), and then vertically remove the sensor from the surge tank.
    G12657601Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror