Fuel Injected

Ensure sufficient secondary spark is available.
Ensure distributor pick-up coil resistance is within specification.
Ensure distributor pick-up coil air gap is correct.
Ensure ignition coil resistance is within specification.
Ensure engine has sufficient compression.
Ensure there are no vacuum leaks.
Ensure fuel system pressure is correct.
Check PCV valve for free movement.
Ensure EGR valve operation is correct and that valve closes completely.
Check air intake system for restriction.
Check for cracks or poor connections at throttle body (if equipped).
Ensure ignition and valve timing is correct.
Verify noise suppressor has correct resistance.
Check noise suppressor resistance (if equipped).
Check operation of air induction valve.
Check Manifold Air Temperature (MAT) sensor.
Check coolant temperature sensor.