lemon-mirror:
Home >> Honda >> 1987 >> Prelude Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> EGR System >> System Testing >> CARBURETED >> Cold Engine

Cold Engine

  1. Disconnect vacuum hose No. 16 from EGR valve and connect vacuum gauge to hose. Start engine and raise engine speed to 4500-5000 RPM. Vacuum should not be available.
  2. If vacuum is not present, proceed to HOT ENGINE  test. If vacuum is available, check for voltage at EGR control solenoid valve A (Yellow/White wire at emission control box connector).
  3. If voltage is present, replace EGR control solenoid valve A and retest. If there is no voltage, check thermosensor operation, wiring, and fuses and retest. Check thermosensor and vacuum switch C.
  4. Check for voltage at control unit connector (Black/Yellow wire) with ignition on. There should be voltage. If there is no voltage, check wiring. Check Brown/Black wire for continuity between control unit and ground. There should be continuity.
· About lemon-mirror