lemon-mirror:
Home >> Honda >> 2008 >> Fit Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Electronic Throttle Control System >> Accelerator Pedal Module Removal/Installation

Accelerator Pedal Module Removal/Installation

  1. Disconnect the accelerator pedal module connector (A).
    Fig 1: Accelerator Pedal Module And Connector With Torque Specification
    G05454729Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the accelerator pedal module (B).
    NOTE: The APP sensor is not available separately. Do not disassemble the accelerator pedal module.
  3. Install the parts in the reverse order of removal.
· About lemon-mirror