lemon-mirror:
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Electrical >> Starter >> Starters >> Removal & Installation >> Battery Replacement >> Installation Procedure

Installation Procedure

  1. Install the battery insulator, if necessary.
  2. Install the battery.
  3. Install the battery hold down retainer and bolt. Tighten the battery hold down retainer bolt to 25 N.m (18 lb ft).
  4. Connect the positive battery cable. Tighten the positive battery cable bolt to 17 N.m (13 lb ft).
  5. Connect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE (SINGLE BATTERY) .
· About lemon-mirror