lemon-mirror:
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Replacement >> Removal Procedure

Removal Procedure

  1. Remove the power steering pulley. Refer to Power Steering Pulley Replacement .
  2. Place a drain pan under the pump.
  3. Remove the hose guide bracket from the front of the pump.
  4. Remove the hoses from the pump.
  5. Remove the bolt retaining the rear bracket to the engine.
    6. Fig 1: Installing The Power Steering Pump (4.8L, 5.3L and 6.0L)
    GM346660Courtesy of GENERAL MOTORS CORP.
  6. Remove the bolts from the front of the pump.
  7. Remove the pump from the vehicle.
    8. Fig 2: Bracket & Power Steering Pump
    GM656325Courtesy of GENERAL MOTORS CORP.
  8. Remove the bracket (3) from the rear of the pump (1).
· About lemon-mirror