lemon-mirror:
Home >> Hummer >> 2010 >> H3T Base, Standard >> Repair and Diagnosis (Single Page) >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> Body Control Module Programming and Setup >> After Programming

After Programming

Perform the following to avoid future misdiagnosis:

  1. Turn the ignition OFF for 10 seconds.
  2. Connect the scan tool to the data link connector.
  3. Turn the ignition ON, with the engine OFF.
  4. Use the scan tool in order to retrieve history DTCs from all modules.
  5. Clear all history DTCs.
· About lemon-mirror