Anti-Lock Brake System
- Components
- Description
- Hydraulic System Diagram
- System Function
- Circuit Diagram
- Troubleshooting
- Standard Flow Of Diagnostic Troubleshooting
- Notes With Regard To Diagnosis
- Abs Check Sheet
- Problem Symptoms Table
- Abs Does Not Operate
- Abs Does Not Operate Intermittently
- Communication With Hi-Scan (Pro) Is Not Possible (Communication With Any System Is Not Possible)
- Communication With Hi-Scan (Pro) Is Not Possible (Communication With Abs Only Is Not Possible)
- When Ignition Key Is Turned On (Engine Off), The Abs Warning Lamp Does Not Light Up
- Even After The Engine Is Started, The Abs Warning Lamp Remains On
- Brake Warning Lamp Is Abnormal
- Diagnostic Trouble Code Chart
- Diagnostic Trouble Code Identification
- DTC C1101 (Over Voltage) C1102 (Low Voltage): Battery Voltage Out Of Range (Low Or Over Voltage)
- DTC C1200, C1203, C1206, C1209: Wheel Speed Sensor Open Or Short To Ground
- DTC C1201, C1204, C1207, C1210: Wheel Speed Sensor Malfunction (Speed Jump Or Damaged Exciter)
- DTC C1202, C1205, C1208, C1211: Wheel Speed Sensor Signal Malfunction (Air-Gap Error Or Wrong Excite)
- DTC C1604: ECU Hardware Failure (ECU Internal Or Solenoid Valve Failure)
- DTC C2112: Valve Relay Failure (Valve Relay Or Fuse Failure)
- DTC C2402: Motor Relay Or Motor Electrical Failure
- DTC C1503: TCS Switch Failure (Only System W/TCS)
- DTC C1605: CAN Hardware Failure (Only System With TCS)
- DTC C1610: CAN Bus Off Failure (Only System With TCS)
- DTC C1611: EMS Time-Out Failure (Only System With TCS)
- DTC C1612: TCM Time-Out Failure (Only System With TCS)
- DTC C1613: TCM Wrong-Matched Transmission Failure (Only System With TCS)
- DTC C2227: Brake Disc Overheat (Only System With TCS)
- Bleeding Brake System
- Anti-Lock Braking System Control Module
- Abs Operation Check
- Anti-Lock Braking System Wheel Speed Sensor