lemon-mirror:
Home >> Hyundai >> 2011 >> Elantra GLS, Automatic >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System >> Specifications >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Check signal waveform of Input & output speed sensor using the GDS.

    Specification:  Refer to "SIGNAL WAVEFORM " section.



  1. Turn ignition switch OFF.
  2. Disconnect the oil temperature sensor connector.
  3. Measure resistance between sensor signal terminal and sensor ground terminal.
  4. Check that the resistance is within the specification.
· About lemon-mirror