lemon-mirror:
Home >> Hyundai >> 2013 >> Elantra GLS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Fuel Tank Pressure Sensor (FTPS) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the rear seat (Refer to "REAR SEAT " ).
  3. Remove the fuel pump service cover (A).
    Fig 1: Fuel Pump Service Cover
    G10234906Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the fuel tank pressure sensor connector (A).
  5. Remove the fuel tank pressure sensor (B) after releasing the hooks vertically.
    Fig 2: Fuel Tank Pressure Sensor And Connector
    G10234907Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror