lemon-mirror:
Home >> Hyundai >> 2013 >> Elantra GLS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Variable Charge Motion Actuator (VCMA) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the VCMA connector (A).
    Fig 1: Variable Charge Motion Actuator Connector
    G10234938Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the VCMA (A) after removing 3 installation bolts.
    Fig 2: Variable Charge Motion Actuator
    G10234939Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror