lemon-mirror:
Home >> Hyundai >> 2014 >> Azera Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the air cleaner assembly.

    (Refer to "AIR CLEANER ")

  3. Disconnect the crankshaft position sensor connector (A).
  4. Remove the installation bolt (B), and then vertically remove the sensor from the transaxle housing.
    Fig 1: Identifying Crankshaft Position Sensor Connector And Installation Bolt
    G08809674Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror