lemon-mirror:
Home >> Hyundai >> 2014 >> Tucson GLS, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Accelerator Position Sensor (APS) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
    Fig 1: Identifying Accelerator Position Sensor Connector
    G09798636Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the installation nuts (B), the bolt (C) and then remove the accelerator pedal module.
    Fig 2: Identifying Accelerator Pedal Module Nuts
    G09798637Courtesy of HYUNDAI MOTOR AMERICA
    Fig 3: Identifying Accelerator Pedal Module Bolts
    G09798638Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror