lemon-mirror:
Home >> Hyundai >> 2015 >> Accent GLS, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Knock Sensor (KS) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the intake manifold (Refer to "INTAKE AND EXHAUST SYSTEM ").
  3. Disconnect the injector connector (A).
  4. Remove the installation bolt (B), and then remove the sensor from the cylinder block.
Fig 1: Injector Connector And Installation Bolt
G10362437Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror