Repair procedures: Removal

Disconnect the battery negative terminal.
Remove the engine cover.
Disconnect the LH/RH ignition coil connectors (A).

Fig 1: LH/RH Ignition Coil Connectors (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: LH/RH Ignition Coil Connectors (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA
Remove the LH/RH ignition coil (A).

Fig 3: LH/RH Ignition Coils (1 Of 2)

G10382467

Courtesy of HYUNDAI MOTOR AMERICA

Fig 4: LH/RH Ignition Coils (2 Of 2)

G10382468

Courtesy of HYUNDAI MOTOR AMERICA

NOTE:

When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).

Fig 5: Pulling Lock Pin

G10382469

Courtesy of HYUNDAI MOTOR AMERICA