lemon-mirror:
Home >> Hyundai >> 2016 >> Azera Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Variable Intake Solenoid (VIS) Valve >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the variable intake solenoid valve connector (A).
  3. Disconnect the vacuum hoses (B, C) from the valve.
  4. Remove the installation nut (D), and then remove the valve.

    [Vave 1 (Intake manifold)] 

    Fig 1: Variable Intake Solenoid Valve Connector, Vacuum Hoses, Installation Nut (Valve 1 Intake Manifold)
    G10367504Courtesy of HYUNDAI MOTOR AMERICA

    [Vave 2 (Surge tank)] 

    Fig 2: Variable Intake Solenoid Valve Connector, Vacuum Hoses Installation Nut (Valve 1 Surge Tank)
    G10367505Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror