lemon-mirror:
Home >> Hyundai >> 2016 >> Santa Fe SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Accelerator Position Sensor - APS >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the installation bolt (B) and nuts (C), and the remove the accelerator pedal module.
    Fig 1: Accelerator Position Sensor Connector, Nuts And Bolts
    G10574919Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Accelerator Position Sensor Installation Bolt
    G10574920Courtesy of HYUNDAI MOTOR AMERICA
· About lemon-mirror