lemon-mirror:
Home >> Hyundai >> 2023 >> Palisade Calligraphy, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Heated Oxygen Sensor (HO2S) >> Repair Procedures >> Removal >> Notes

Repair Procedures: Removal: Notes

  1. Disconnect the battery (-) terminal.
  2. Remove the oxygen sensor (B) after disconnect the Connector (A).
    NOTE:
    • Note that the SST (Part No.: 09392-2H100 or 09392-1Y100) can be used for removing the heated oxygen sensor.

    Tightening torque: 

    35.3 - 45.1 N.m (3.6 - 4.6 kgf.m, 26.0 - 33.3 lb-ft)

· About lemon-mirror