lemon-mirror:
Home >> Infiniti >> 2004 >> FX35 RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> DTC P0101 MAF Sensor >> DTC confirmation procedure >> Procedure For Malfunction A

Procedure For Malfunction A

NOTE: If engine will not start or stops soon, wait at least 10 seconds with engine stopped (Ignition switch ON) instead of running engine at idle speed.

With CONSULT-II 

  1. Turn ignition switch ON.
  2. Select DATA MONITOR mode with CONSULT-II. See Figure.
  3. Start engine and warm it up to normal operating temperature.
  4. Run engine for at least 10 seconds at idle speed.
  5. If DTC is detected, Go to DIAGNOSTIC PROCEDURE .

With GST 

Follow the procedure With CONSULT-II above.

· About lemon-mirror