lemon-mirror:
Home >> Infiniti >> 2014 >> QX80 RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction) >> Basic Inspection >> Accelerator Pedal Released Position Learning >> Work Procedure

Work Procedure

  1. START 
    1. Check that accelerator pedal is fully released.
    2. Turn ignition switch ON and wait at least 2 seconds.
    3. Turn ignition switch OFF and wait at least 10 seconds.
    4. Turn ignition switch ON and wait at least 2 seconds.
    5. Turn ignition switch OFF and wait at least 10 seconds.

      : END

· About lemon-mirror