lemon-mirror:
Home >> Kia >> 2003 >> Rio Base, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Specifications >> Wheel Alignment Procedures >> Camber Adjustment >> Adjustment Procedure

Adjustment Procedure

  1. Turn the front spindle clockwise so that the number "1" mark is aligned with the vertical line on the spindle bracket. See Fig 1 .
  2. Turn the rear spindle clockwise so that the number "1" mark is aligned with the vertical line on the spindle bracket. Each numerical point indicated on the spindle increases the camber by 0.18 degrees when turned to the vertical line on the spindle bracket. After adjustment is complete. compare measurement with manufacturer's specification. See WHEEL ALIGNMENT SPECIFICATIONS  table.
  3. Tighten all fasteners to specification. See TORQUE SPECIFICATIONS  .
Fig 1: Adjusting Camber & Caster
G00285399Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror