lemon-mirror:
Home >> Kia >> 2008 >> Amanti >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Output Speed Sensor >> Installation

Output Speed Sensor: Installation

  1. Install the new O-ring to the output shaft speed sensor.
  2. Remove the output shaft speed sensor.

    TORQUE: 10-12 N.m (1.0-1.2 kgf.m, 7-8 lb-ft)

    CAUTION: While installing the output shaft speed sensor, do not allow dust or other foreign particles to enter the transaxle.
  3. Check the connector for dust, dirt, or oil, then connect the connector securely.
  4. Installation is the reverse of removal.
· About lemon-mirror