lemon-mirror:
Home >> Kia >> 2011 >> Sorento Base, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L >> Manifold Absolute Pressure Sensor (MAPS) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor from the surge tank.
    Fig 1: Identifying Manifold Absolute Pressure Sensor Connector And Installation Bolt
    G07415501Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror