lemon-mirror:
Home >> Kia >> 2012 >> Soul ! >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Manifold Absolute Pressure Sensor (MAPS) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor from the intake manifold.
    Fig 1: Manifold Absolute Pressure Sensor Connector And Bolt Component Location
    G08331032Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror