lemon-mirror:
Home >> Kia >> 2016 >> Forte5 LX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
    Fig 1: Locate Accelerator Position Sensor Connector
    G11796960Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the installation bolt (B), the nuts (C) and then remove the accelerator pedal module.
Fig 2: Locate Accelerator Pedal Module Installation Bolt
G11796961Courtesy of KIA MOTORS AMERICA, INC.
Fig 3: Locate Accelerator Pedal Module Nuts
G11796962Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror