lemon-mirror:
Home >> Kia >> 2016 >> Sorento L >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L >> Accelerator Position Sensor (APS) >> Repair Procedure >> Removal

Repair Procedure: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the upper mounting cap (B), and then remove the mounting nut (C).
  4. Remove the lower mounting cap (D), and then remove the mounting nut (E).
Fig 1: Locate Lower Mounting Cap And Mounting Nut
G11865600Courtesy of KIA MOTORS AMERICA, INC.
Fig 2: Locate Upper Mounting Cap And Mounting Nut
G11865601Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror