lemon-mirror:
Home >> Kia >> 2017 >> Sedona EX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the air cleaner assembly.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the engine coolant temperature sensor connector (A).
  4. Remove the spring clip (B), and then pull the sensor from the water temperature control assembly.
    CAUTION:
    • Note that engine coolant may flow out from the water temperature control assembly when removing the sensor.
    Fig 1: Locating Engine Coolant Temperature Sensor Connector And Spring Clip
    G12274614Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror