lemon-mirror:
Home >> Kia >> 2021 >> Sedona EX >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Remove the air cleaner assembly.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the crankshaft position sensor connector (A).
    G13044237Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the mounting bolt (A), and then vertically remove the sensor from the transaxle housing.

    Crankshaft Position Sensor mounting bolt: 

    6.8 - 9.8 N.m (0.7 - 1.0 kgf.m, 5.0 - 7.2 lb.ft)

    G13044238Courtesy of KIA MOTORS AMERICA, INC.
· About lemon-mirror