Component Inspection
- Connect the KDS on the Data Link Connector (DLC).
- Turn the ignition switch ON.
- Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
Specification
:
| Accelerator |
Output Voltage (V) [Vref = 5.0V] |
| Position |
APS1 |
APS2 |
| C.T |
0.7 - 0.8 |
0.33 - 0.43 |
| W.O.T |
4.13 - 4.22 |
2.04 - 2.13 |