Components Inspection
- Turn ignition switch OFF.
- Disconnect the water temperature sensor connector.
- Remove the sensor.
- After immersing the thermistor of the sensor into engine coolant, measure resistance between ECTS signal terminal and ground terminal.
- Check that the resistance is within the specification.
| Temperature | Resistance (kΩ) | |
|---|---|---|
| °C | °F | |
| 45 | 113 | 244.8 - 281.4 |
| 55 | 131 | 162.5 - 186.5 |
| 60 | 140 | 133.5 - 153.5 |
| 71 | 159.8 | 88.93 - 102.13 |
| 85 | 185 | 55.16 - 63.36 |
| 110 | 230 | 26.02 - 29.82 |
| 125 | 257 | 17.5 - 19.7 |